Free notes
Ring final practical, step 3: figure of eight, line to CPCWhich ring reading goes on the schedule?
Free from the notes: Sparky’s video on it, the section word for word as members see it, and a PDF to keep.
The question at the end: Which ring reading goes on the schedule? The answer is in the notes below.
The notes
Exactly as they are on the site.
Same idea, different pair. Take the neutrals out of the cross-connection and join each line to the CPC of the opposite leg. Change the meter setting if it asks you to, then test line to CPC at every socket and outlet again.
- Expect (r1 + r2) ÷ 4, the same at every point, a little higher on spurs.
- This is your R1 + R2. Record the highest reading in column 21, the same column as a radial’s method 1 result.
- With all three steps done, tick polarity for the circuit.
Guidance Note 3 · 2.6.6 step 3
Free section from Sparky Study Notes. The full Level 3 notes, 1,463 practice questions and the video lessons: sparkystudynotes.co.uk
Test yourself on it
The tests are in the members’ area. Get one wrong and it shows you why, and where to revise.
Get new notes and exam tips from Sparky
About one email a fortnight. Unsubscribe any time. Privacy noticeThat was one section. There are 583.
Sparky Study Notes is the whole Level 3 syllabus written up like this: the explanation, the worked example, and where it is in your book. With a video lesson for every part and a practice paper for every exam.
- 583sections of written notes
- 35video lessons
- 1,463practice questions
- 146diagrams, redrawn
- 18th Edition
- Building Regs
- PAT
- Fundamental Inspection & Testing
- Initial Verification
- Periodic Inspection & Testing