SPARKYSTUDY NOTES

Free notes

Continuity: the two test methodsR1 plus R2, or R2 on its own?

Free from the notes: Sparky’s video on it, the section word for word as members see it, and a PDF to keep.

From Sparky’s full video lesson. Members get the whole lesson on every notes page.

The notes

Exactly as they are on the site.

Download these notesPDF · free to keep

The first test in the sequence is continuity of protective conductors, including main and supplementary bonding. There are two methods, and you need both names.

1Test method 1
R1 + R2
Line and CPC, linked at the board, measured at the load
2Test method 2
R2 only
One conductor, both ends — an end-to-end test
?What is continuity actually for? To prove there are no breaks from one termination to the other — a continuous, unbroken path of copper so fault current has somewhere to flow. Especially on the CPC.
"End to end" is worth fixing in your head. One lead on one end of the conductor, the other lead on the other end. When ring final testing starts, "end to end" comes up constantly — and every time, it's just an R2 test.
✋What instrument? A low resistance ohmmeter. This has been an exam question. Don't answer "multifunction tester" — the MFT contains a low resistance ohmmeter, but the instrument being asked about is the low-ohm meter.

GN3 · Section 2 · continuity of protective conductors ★

Test yourself on it

The tests are in the members’ area. Get one wrong and it shows you why, and where to revise.

Get access

Get new notes and exam tips from Sparky

About one email a fortnight. Unsubscribe any time. Privacy notice

That was one section. There are 583.

Sparky Study Notes is the whole Level 3 syllabus written up like this: the explanation, the worked example, and where it is in your book. With a video lesson for every part and a practice paper for every exam.

  • 583sections of written notes
  • 35video lessons
  • 1,463practice questions
  • 146diagrams, redrawn
  • 18th Edition
  • Building Regs
  • PAT
  • Fundamental Inspection & Testing
  • Initial Verification
  • Periodic Inspection & Testing
Get access — £100 12 months. One payment. See what’s inside